Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program the Key for a Ford Transit

Model: Ford Transit Custom - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Key

See other generations:
Video tutorial

Although this operation is easy to perform, it requires specific equipment accompanied by dedicated software, like those shown in the tutorial video available. This equipment must be connected via cable to the OBD port of the vehicle to communicate with the ECU. Then, configure the equipment, select the vehicle model, etc., and finally proceed to program the blank key, which means copying the code into the transponder.

To ensure a positive final result, it is advisable to test by starting the engine and activating the central locking.


Posted on 28 February 2026 by ScegliAuto


Related tutorials

How to Change the Key Battery on a Ford Transit Mk8
How to Change the Key Battery on a Ford Transit Mk8
Ford Transit (2014-2024 / MK 8) If the key for your Ford Transit Mk8 has stopped working due to a completely dead battery, simply follow the procedure below to replace it with a new…
How to Replace the Key Battery of a Ford Transit
Ford Transit (2006-2014 / MK 7) Before you begin, you will need a replacement battery for the key. Start by inserting the tip of a flathead screwdriver into the slot on the side of …
How to Open the Bonnet of a Ford Transit
How to Open the Bonnet of a Ford Transit
Ford Transit (2006-2014 / MK 7) On most cars, the front bonnet opens by pulling the lever inside the vehicle; on our Ford Transit, the bonnet opens with the ignition key. Here’s how…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos