Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Disassemble the Window Regulator Mechanism and Motor of the Geely Ck

Model: Geely Ck MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Power window motor

Video tutorial

In this video tutorial, you will learn how to disassemble the window regulator mechanism and motor of the Geely Ck by following the instructions below. First, open the front door and start by removing the front door panel, unscrewing all the fastening screws; then disconnect the electrical connector of the switch panel and the window regulator mechanism, subsequently unscrewing the screws to remove it and replace it with the new one, as shown in the video.

At this point, install the new window regulator mechanism with its original replacement, following the video to the end!


Updated on 16 May 2026 by ScegliAuto


Related tutorials

How to Replace the Starter Motor on a Geely CK
How to Replace the Starter Motor on a Geely CK
Geely Ck (2005-2016 / MK 1) To replace the starter motor on a Geely CK, open the hood to access the components in the engine bay: the starter motor is located at the rear of the…
How to Replace the Timing Belt on a Geely CK
How to Replace the Timing Belt on a Geely CK
Geely Ck (2005-2016 / MK 1) Today, you will see the main instructions that will allow you to remove and replace the timing belt on a Geely CK. First, open the hood and start dis…
How to Replace the Cabin Fan of the Geely CK
How to Replace the Cabin Fan of the Geely CK
Geely Ck (2005-2016 / MK 1) This guide outlines the main steps to remove and replace the cabin fan of the Geely CK. First, get inside the vehicle on the front passenger side and…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos