Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Clock on a Genesis G80

Model: Genesis G80 MK 2, DH - Years 2016-2020
Part: Clock

To reset the clock on the Genesis G80, activate the screen by pressing the central button on the console, and press the "home" button. On the screen, press the "setup" icon and scroll through the icons until you find the "clock" icon. Press the clock icon. At this point, you will see the "gps time format" and change the time from this icon. You will notice that the time also changes on the analog clock located below the screen. You can choose to display the time in either 24-hour or 12-hour format. You can also change the time zone, which the system will adjust automatically. You can also change the year, month, and day.

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Clock on the Genesis G80
How to Set the Clock on the Genesis G80
Genesis G80 (2016-2020 / MK 2, DH) Discover how to set the clock on the Genesis G80 by following the instructions below. First, get in the vehicle and turn on the instrument cluster; t…
How to Reset the Service Light on a Genesis G80?
How to Reset the Service Light on a Genesis G80?
Genesis G80 (2016-2020 / MK 2, DH) As we can see in this tutorial, resetting the service light on a Genesis G80 is a very simple and quick operation. Before proceeding, make sure you h…
How to Replace the Battery in the Genesis G80
How to Replace the Battery in the Genesis G80
Genesis G80 (2016-2020 / MK 2, DH) In this guide, learn how to remove and replace the battery in the Genesis G80 in simple, quick steps. First, open the trunk and start removing the fl…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos