Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Door Handle Trim on the Genesis GV80

Model: Genesis Gv80 MK 1, JX1 - Years 2020-2026

To customize your vehicle by replacing the trim behind the door handle, follow the instructions in this video and described below. First, access the cabin, pull the door handle towards you, and gently pry off the plastic trim panel behind it using a plastic lever. Then, take the new trim and position it in place of the old one, applying pressure to properly secure the clips.

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Genesis Gv80 (2020-2026 / MK 1, JX1) To remove the door panel in a Genesis GV80, unscrew the mounting screws located in the handle pocket and just behind the window switch panel. Once al…
Genesis Gv80 (2020-2026 / MK 1, JX1) To open the rear hatch of the Genesis GV80, you can use different methods: first, press the button located at the base of the rear windshield wiper; …
Genesis Gv80 (2020-2026 / MK 1, JX1) To change the engine oil of the Genesis GV80, disconnect the fasteners securing the lower protective panel of the vehicle to access the oil drain plu…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos