Do it yourself
| ||||
|
GMC Sierra - Video tutorial
Model: GMC Sierra
MK 5
- Years 2019-2024 In this video you can see how you can replace the GMC Sierra tire by following some essential steps. First of all, equip yourself with a wrench to unscrew the bolts and a pair of protective gloves. Under the rear seat you can find the Jack to lift the vehicle and the key to unscrew the bolts, you can also find the safety supports to lock the wheels. Once you have placed the safety supports to lock the wheel, prepare the wrench to unscrew the bolts which are six per rim. Now take the vehicle's remote key and separate the remote from the metal key. Take only the metal key and as shown in the video insert it in the rear compartment. Combine the keys and remove the spare wheel located under the vehicle as shown in the video. Now put the jack under the vehicle near the wheel and lift until the wheel comes off the ground. Unscrew the bolts, remove the damaged wheel, replace it with the spare, tighten the bolts and off you go.
Posted on 10 April 2024 by ScegliAuto
How do you replace the radiator of the GMC Sierra?
GMC Sierra (2007-2014 / MK 3) In order to replace the GMC Sierra radiator, you have to open the hood, so that you can have access to the grille in the front of the engine compartm
How to replace the GMC Sierra battery
GMC Sierra (2014-2018 / MK 4) If the battery of the key of your GMC Sierra is completely exhausted and you need to replace it, all you have to do is follow the instructions in thi
How do i replace the battery of the GMC Sierra?
GMC Sierra (2014-2018 / MK 4) In order to replace the GMC Sierra battery, you need to open the hood and access the engine compartment, identifying the battery located immediately Other guides that may interest you
|
How to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.078
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |