Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan Resistor on a GMC Sierra

Model: GMC Sierra MK 2 - Years 1999-2007

This guide shows you how to remove and replace the cabin fan resistor or air conditioning resistor on a GMC Sierra by following these simple steps. First, get inside the vehicle and remove the plastic panel located at the bottom on the passenger side to access the cabin fan and specifically the resistor; then disconnect the electrical connector and remove the screws securing the resistor to take it out and replace it with a new one, as shown in the video. Finally, reassemble everything, following the video to the end!

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Fan on a GMC Sierra?
How to Replace the Cabin Fan on a GMC Sierra?
GMC Sierra (1999-2007 / MK 2) To replace the cabin fan on a GMC Sierra, unscrew the screws securing the panel located directly under the glove compartment on the passenger side: o…
Where is the fuse box located in the cabin of the GMC Sierra?
Where is the fuse box located in the cabin of the GMC Sierra?
GMC Sierra (2014-2018 / MK 4) In this new guide dedicated to all of you who own a GMC Sierra, we will discover the various steps you need to follow if you intend to locate the fus…
How to Replace the Cabin Air Filter in a GMC Sierra?
How to Replace the Cabin Air Filter in a GMC Sierra?
GMC Sierra (2014-2018 / MK 4) In this tutorial, you will see how to replace the cabin air filter in a GMC Sierra, a very simple and quick operation. First, since the filter is loc…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos