Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Low Beam Bulb on a GMC Sierra

Model: GMC Sierra MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight bulb

See other generations:
Video tutorial

To change the low beam bulb on a GMC Sierra, first remove the airbox by unscrewing the 4 screws using a T20 Torx wrench. At the back of the headlight, remove the cover to access the low beam bulb.

Take out the bulb holder by turning it counterclockwise. Disconnect the bulb by releasing the tabs, ensuring the connector does not fall off. Take the new bulb out of the package and insert it into the bulb holder.

Screw the bulb holder with the bulb back into its housing and test the bulb to see if it works. Now, replace the headlight cover and reattach the airbox, securing the lower clips and tightening the Torx screws.


Updated on 3 June 2026 by ScegliAuto


Related tutorials

How to Replace the Low Beam Bulbs in a GMC Sierra?
How to Replace the Low Beam Bulbs in a GMC Sierra?
GMC Sierra (1999-2007 / MK 2) In this video, you can see how to replace the low beam bulbs in a GMC Sierra. This is a very simple and quick operation; you don't need any tools. Fi…
How to Replace the License Plate Bulb on the GMC Sierra?
How to Replace the License Plate Bulb on the GMC Sierra?
GMC Sierra (2014-2018 / MK 4) To replace the license plate light bulb on the GMC Sierra, access the internal components of the bumper from the underside of the vehicle. Here, you …
Install LED Bulbs in the Fog Lights on the GMC Sierra
Install LED Bulbs in the Fog Lights on the GMC Sierra
GMC Sierra (2014-2018 / MK 4) Before starting the replacement of the fog light bulbs on the GMC Sierra, position your vehicle on a lift or a stable, secure surface. Take this prec…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos