Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Light on a GMC Savana

Model: GMC Savana MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

The procedure to manually reset the engine oil warning light on your 2006 GMC Savana is very simple and takes just a few seconds to complete. Everything you need to do is described in this mini guide.

First, make sure to start the procedure with the vehicle completely off. Then, insert the key and turn the ignition on. Immediately after, press the accelerator pedal three times in a row (within 10 seconds). Once the warning light disappears, turn off the ignition and the reset of the light is complete.


Updated on 3 July 2026 by ScegliAuto


Related tutorials

GMC Savana (2003-2024 / MK 2) In this tutorial, you will see how to reset the oil service light on a GMC Savana, a very simple and quick operation to perform only after completing…
GMC Savana (2003-2024 / MK 2) In this video, you will see how the appearance of an orange light shaped like a wrench, along with the oil symbol in the upper left of the GMC Savana…
GMC Savana (2003-2024 / MK 2) As shown in this tutorial, resetting the oil service light on a GMC Savana is a very simple and quick operation. This procedure should only be perfor…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos