Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. GMC
    3. :
  3. Sierra
    4. : How do you replace the serpentine belt on a GMC Sierra?

GMC Sierra - Video tutorial

Model: GMC Sierra MK 2 - Years 1999-2007
Part: V-belt
Operation: How do you replace the serpentine belt on a GMC Sierra?

To replace the serpentine belt of the GMC Sierra, you need to open the hood so that you can access the components inside the engine compartment. You will need to unscrew the screws that secure the air filter box so that it can be moved to give access to the belt tensioner pulley. By unscrewing the central bolt, you can remove the pulley and completely remove the old belt, replacing it with a new one. After the new belt is inserted, you will need to reattach the tensioner pulley and also secure the air filter box.


Posted on 14 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos