Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Light on the GMC Acadia

Model: GMC Acadia MK 1 - Years 2007-2016
Part: Service warning light

Today, you will learn how to reset the service light on the 2011 GMC Acadia. The steps to reset the "oil change" light are: -turn on the vehicle's ignition; -press the button with the car symbol located on the center dashboard, below the radio; -select the "Oil Change" option; -hold down the button with the "V" until the light turns off completely; Once you have completed the above steps, you can turn the vehicle off and back on. If the light continues to turn on, take it to a shop for a computerized diagnosis via the OBD port.

Updated on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

GMC Acadia (2017-2024 / MK 2) In this new guide dedicated to your second-generation GMC Acadia (2017), discover where the main fuse box is located. For safety reasons, before proc…
GMC Acadia (2017-2024 / MK 2) This video shows how to reset the engine oil light on a GMC Acadia. The steps are very simple and quick. Get in the vehicle and turn on the ignition …
GMC Acadia (2007-2016 / MK 1) To replace the air filter in the GMC Acadia, open the hood to locate the filter box on the right side of the engine compartment. To extract the filte…

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos