Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the exhaust on the Harley Davidson Street Glide?

Model: Harley Davidson Street Glide
Part: Exhaust muffler

Video tutorial

To replace the exhaust on the Harley Davidson Street Glide, loosen the support screws that secure the exhaust along the right side of the vehicle. Once the support screws are loosened, you can then loosen the screws that secure the exhaust headers, located on the right side but at the top. When these are loosened, completely detach the old exhaust pipe to install the new one; once all components are secured, check its operation.


Updated on 1 November 2026 by ScegliAuto


Related tutorials

Street Glide This guide covers the main steps to perform a routine service on the Harley Davidson Street Glide, including changing the engine oil and oil filter. …
Street Glide In this tutorial, you will see how to change the engine oil on a Harley-Davidson Street Glide, a very simple and quick operation. First, wait until t…
Street Glide To replace the air filter on the Harley Davidson Street Glide, loosen the screws securing the air filter to its housing located on the right side of …

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos