Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the CTBA system of the Honda Vezel?

Model: Honda Vezel Hr V MK 3 - Years 2021-2026
Part: Checks and maintenance

In order to deactivate the CTBA system of the Honda Vezel, you need to insert the ignition key into the corresponding slot, turning it to turn on the instrument panel: once the panel is on, you can navigate the menu that appears on the screen using the buttons on the right side of the steering wheel. You will need to select the "Driver Assist System Setup" option and then "City-Brake Active System" using the SEL button located on this part of the steering wheel: this way you can deactivate the system, returning to the initial screen and turning off the instrument panel.

Posted on 17 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you activate the CTBA of the Honda Vezel?
How do you activate the CTBA of the Honda Vezel?
Honda Vezel Hr V (2013-2020 / MK 2) The CTBA (City Brake Active) is the automatic braking system at low speed, which has been designed to avoid minor collisions installed on Honda cars.…
How to Replace the Spark Plugs on the Honda HR-V
How to Replace the Spark Plugs on the Honda HR-V
Honda Vezel Hr V (2013-2020 / MK 2) Discover in this guide the steps to remove and replace the engine spark plugs on the Honda HR-V, following the instructions below. First, open the ho…
How to Replace the Remote Battery for the Honda HR-V?
How to Replace the Remote Battery for the Honda HR-V?
Honda Vezel Hr V (2021-2026 / MK 3) In this tutorial, you will learn how to replace the remote battery for the Honda HR-V, a very simple and inexpensive task. Before you begin, obtain a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos