Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Console on a Honda CR-V

Model: Honda CR-V MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Center console tunnel

See other generations:
Video tutorial

Learn how to remove the centre console on a Honda CR-V. Use a plastic trim tool to pry off the cover located at the rear of the centre console, and remove the leather gaiter from the gear lever if necessary. After removing the plastic cover, use a socket wrench to unscrew the securing bolts located in the centre console storage compartment.

Once this is done, pull the console away and disconnect any power cables. Finally, secure the new part in place and reassemble all components of the storage compartment as previously removed.


Updated on 4 March 2026 by ScegliAuto


Related tutorials

How to Remove the Steering Wheel of the Honda CR-V
How to Remove the Steering Wheel of the Honda CR-V
Honda CR-V (2007-2012 / MK 3) Today's instructions will show you how to remove and replace the steering wheel of the Honda CR-V in simple and quick steps. First, get inside the ve…
How to Dismantle the Dashboard of the Honda CR-V
How to Dismantle the Dashboard of the Honda CR-V
Honda CR-V (1995-2001 / MK 1) In this guide, follow the main steps to dismantle and replace the dashboard and its components of the Honda CR-V. First, open the front doors and sta…
Guide to Replacing the Timing Chain on a Honda CR-V 2.0 (2006)
Honda CR-V (2002-2007 / MK 2) This guide provides the main instructions for removing and replacing the timing chain on the second generation Honda CR-V, 2006 model, with a 2.0 eng…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos