Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a Honda Pilot

Model: Honda Pilot YF4, YF3 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

See other generations:
Video tutorial

Today, I will explain how to reset the oil light on a Honda Pilot. Turn on the ignition and press and hold the trip button on the odometer.

Keep holding the button until the instrument cluster display starts to blink, then release the button and press it again until the reset is complete. Once the reset is done, restart the instrument cluster to save the mileage update for the next service interval.

If the reset fails, you will need to visit a shop for a computerized diagnosis. It is very important not to reset the light without first performing the necessary service operations.


Posted on 18 February 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a 2015 Honda Pilot
How to Reset the Service Light on a 2015 Honda Pilot
Honda Pilot (2009-2015 / YF4, YF3) Today, you will learn how to reset the oil light on a 2015 Honda Pilot. To reset the light, turn on the ignition and press the button located on the …
How to Reset the Oil Light on a Honda Pilot
How to Reset the Oil Light on a Honda Pilot
Honda Pilot (2009-2015 / YF4, YF3) Resetting the oil light on a Honda Pilot is a procedure to perform immediately after changing the engine oil. The reset allows you to set the next mi…
Resetting the Tire Pressure on a Honda Pilot
Resetting the Tire Pressure on a Honda Pilot
Honda Pilot (2023-2026 / YG2, YG1) In today's tutorial, we will see how to reset the tire pressure warning light on a 2025 Honda Pilot. For this vehicle, there are no special procedure…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos