|
Do it yourself
| |||
| ||||
An Empirical Way to Check if Your Air Conditioner Refrigerant is Low
Model: Honda Odyssey
RL5
- Years:
2011, 2012, 2013, 2014, 2015, 2016, 2017
Video tutorial
The video shows a simple and quick trick to determine if the Freon level in your vehicle's air conditioning system is low. Under the hood, near the compressor, you will find two metal pipes entering the cabin. One small for the high-pressure gas line, and one large for the low-pressure gas line. Start the engine and set the air conditioning to maximum for a few minutes. The small pipe becomes extremely hot: do not touch it. Carefully touch the large pipe (the return line from the evaporator). If it is very cold, the refrigerant level is correct. If it is only cool or at room temperature, then the refrigerant is low and cannot adequately cool the evaporator: it could also be a broken thermostat, a clogged evaporator, or an inefficient compressor. As mentioned, this is an empirical method.
Posted on 3 March 2026 by ScegliAuto
Related tutorials
Honda Odyssey
(2005-2010 /
RL4, RL3)
The reset of the service light on a Honda Odyssey is performed using the button located under the odometer. The selected video shows the steps to fol…
Honda Odyssey
(2011-2017 /
RL5)
To replace the headlight bulb on a Honda Odyssey, open the hood to access the components inside the engine compartment. Disconnect the retaining pin …
Honda Odyssey
(2011-2017 /
RL5)
To reset the Service light on the Honda Odyssey, you need to turn on the instrument panel by inserting the ignition key into the corresponding slot. …
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.029
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |