Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Honda Jazz?

Model: Honda Jazz MK 3 - Years 2013-2019
Part: Service warning light

The attached video guide explains in detail all the steps for performing the Service, should you wish to do it yourself, including oil change and filter replacement. After completing all the required tasks, you will reach the point of cancelling the warning, and here’s what to do: turn on the instrument panel, then use the Sel/Reset buttons and the directional arrows, located at the bottom of the steering wheel, to access the Settings, select the Service option, and reset it. Done, the entire sequence, which takes very little time, has been completed.

Posted on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Honda Jazz
How to reset the service light on the Honda Jazz
Honda Jazz (2008-2013 / MK 2) In a few minutes we will see how to reset the service light for the regular maintenance of the engine oil change on the Honda Jazz. First of all, we …
How to reset the Service light on a Honda Jazz?
Honda Jazz (2008-2013 / MK 2) To reset the Service light on a Honda Jazz, turn on the ignition so you can navigate the menu using the controls on the right side of the steering wh…
How to Reset the Service Light on the Honda Jazz
How to Reset the Service Light on the Honda Jazz
Honda Jazz (2008-2013 / MK 2) .. In today's video, see how to reset the service light on the Honda Jazz. First, turn on the ignition and access the onboard.. …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos