Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Maintenance Light on a Honda Accord

Model: Honda Accord MK 7 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Service warning light

See other generations:
Video tutorial

In today's tutorial, see how to reset the service light on a seventh-generation Honda Accord. Start the procedure by turning the ignition to the first position, then press the ODO button located on the right of the speedometer until the display shows the remaining life of the engine oil. Next, press and hold the ODO button for about ten seconds until the message on the display flashes.

Once done, release the button and press it again until the engine oil life is reset to complete the task as shown in the video.


Posted on 12 May 2026 by ScegliAuto


Related tutorials

How to Reset the Maintenance Light on a Honda Accord
How to Reset the Maintenance Light on a Honda Accord
Honda Accord (1998-2002 / MK 6) Manually resetting the service light on your 2001 Honda Accord takes just a few seconds. Follow this procedure to complete the operation without any …
Resetting the Service Light on the Honda Accord
Resetting the Service Light on the Honda Accord
Honda Accord (2002-2007 / MK 7) The instructions in this guide will show you how to reset the service light for the routine maintenance oil change on the Honda Accord. First, get in…
How to Reset the Tyre Light on the Honda Accord?
How to Reset the Tyre Light on the Honda Accord?
Honda Accord (2012-2017 / MK 9) As we can see in this tutorial, resetting the tyre light on the Honda Accord is a very simple operation. This procedure should only be performed afte…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos