Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Light on the Honda CR-V?

Model: Honda CR-V MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Tail light bulb

See other generations:
Video tutorial

Today, we will go through the instructions to remove the rear lamp and replace the brake light bulbs on the Honda CR-V. First, open the boot and start removing the plastic caps next to the lamp by unscrewing the screws found inside; disconnect the electrical connector of the lamp, as shown in the video.

At this point, disconnect the bulb holders from the housing, replacing any faulty brake lights with new ones (having the same fitting); reassemble the rear lamp and reconnect the electrical connection.


Posted on 5 August 2026 by ScegliAuto


Related tutorials

How to Replace the Third Brake Light on the Honda CR-V
How to Replace the Third Brake Light on the Honda CR-V
Honda CR-V (2012-2017 / MK 4) In this short and simple guide, you will see the steps to dismantle and replace the bulbs of the third brake light on the Honda CR-V. First, move to …
How to Replace the Third Brake Light on the Honda CR-V MK4
How to Replace the Third Brake Light on the Honda CR-V MK4
Honda CR-V (2012-2017 / MK 4) In this tutorial video, you will see how to remove the third brake light for bulb replacement on the fourth series Honda CR-V; this procedure is vali…
How to replace the third brake light bulb on the Honda CR-V?
How to replace the third brake light bulb on the Honda CR-V?
Honda CR-V (2007-2012 / MK 3) To replace the third brake light bulb on the Honda CR-V, open the tailgate to access the panel located at its upper interior. Once this panel is remo…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos