Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Third Brake Light on the Honda CR-V MK4

Model: Honda CR-V MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Light bulb

See other generations:
Video tutorial

In this tutorial video, you will see how to remove the third brake light for bulb replacement on the fourth series Honda CR-V; this procedure is valid for most vehicles. First, open the tailgate and start by removing the plastic trim found on the inside of the third brake light; then unscrew the fixing nuts located inside the holes (using a 10 mm spanner) to unclip and remove the third brake light from the outside, as shown in the video.

Then replace the bulbs or the entire light unit, reassembling everything!


Updated on 24 April 2026 by ScegliAuto


Related tutorials

How to Replace the Third Brake Light on the Honda CR-V
How to Replace the Third Brake Light on the Honda CR-V
Honda CR-V (2012-2017 / MK 4) In this short and simple guide, you will see the steps to dismantle and replace the bulbs of the third brake light on the Honda CR-V. First, move to …
How to Remove the Third Brake Light on a Honda CR-V?
How to Remove the Third Brake Light on a Honda CR-V?
Honda CR-V (2012-2017 / MK 4) In this tutorial, you will see how to remove and then replace the third brake light on a Honda CR-V, an extremely simple and quick operation. First, …
How to replace the front brake pads on the Honda CR-V?
How to replace the front brake pads on the Honda CR-V?
Honda CR-V (2012-2017 / MK 4) To replace the front brake pads on the Honda CR-V, lift the car so that the front wheels are off the ground. Once the car is lifted, loosen the bolts…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos