Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front brake pads on the Honda CR-V?

Model: Honda CR-V MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Brake pads

See other generations:
Video tutorial

To replace the front brake pads on the Honda CR-V, lift the car so that the front wheels are off the ground. Once the car is lifted, loosen the bolts securing the front wheel, remove it completely, and access the components at the back.

At this point, unscrew the bolts holding the brake caliper, remove it from the disc, and slide out the pads inside. After removing the old pads, insert the new ones and reassemble all previously removed components.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Honda CR-V
How to Replace the Front Brake Pads on a Honda CR-V
Honda CR-V (2007-2012 / MK 3) To replace the front brake pads on a Honda CR-V, lift the vehicle so that you can unscrew the bolts securing the wheel corresponding to the pads to b…
Replacement of Rear Brake Pads
Replacement of Rear Brake Pads
Honda CR-V (2002-2007 / MK 2) Lift the vehicle on suitable axle stands and remove the rear wheel; then proceed to unscrew the fastening pins of the brake caliper located at the re…
How to Replace the Front Wheel Bearing on a Honda CR-V
How to Replace the Front Wheel Bearing on a Honda CR-V
Honda CR-V (2012-2017 / MK 4) To replace the front wheel bearing on your vehicle, follow the instructions below and refer to the video. First, remove the front wheel. Then, loosen…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos