Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Honda Jazz

Model: Honda Jazz MK 2 - Years: 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

Today, you will learn how to reset the service light on a Honda Jazz. To perform the reset operation, turn on the instrument cluster and press the reset button located on the underside of the steering wheel. Keep the button pressed for the duration of the reset.

At the end of the procedure, restart the instrument cluster. If this does not work, you will need to visit an authorised workshop for a computerised diagnosis.

Possible reasons for the reset failure could be non-functioning oil level sensors, ABS sensors, or an oil leak from the tank.


Posted on 13 September 2026 by ScegliAuto


Related tutorials

How to reset the service light on the 2011 Honda Jazz
How to reset the service light on the 2011 Honda Jazz
Honda Jazz (2008-2013 / MK 2) To reset the service light and update the mileage for the next service on a 2011 Honda Jazz, first make sure the instrument panel is off. Press the b…
How to reset the service light on the Honda Jazz
How to reset the service light on the Honda Jazz
Honda Jazz (2013-2019 / MK 3) Performing the service light reset, related to the car service, on the Honda Jazz is a very simple operation to carry out independently. To reset the…
How to Reset the Service Light on the Honda Jazz
How to Reset the Service Light on the Honda Jazz
Honda Jazz (2008-2013 / MK 2) In a few minutes, we will see how to reset the service light for the routine maintenance oil change on the Honda Jazz. First, get in the vehicle and …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos