Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Rear Bumper

Model: Honda Civic MK 6 - Years 1995-2001
Part: Rear bumper

To facilitate the removal process, lift the vehicle onto a ramp. Before lifting the vehicle, open the boot. Then, unscrew the fixing screws of the bumper, starting from those located along the edges of the wheel arches. Remove the protective caps from the pins along the closure line of the boot and the clips located at the bottom of the bumper. At this point, unclip the bumper from the sides and remove it: just below the rear light is the bumper mounting plate. If necessary, remove the rear light and adjust the plate. Proceed in reverse for reassembly.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Honda Civic (2006-2012 / MK 8) To remove the rear bumper on a Honda Civic, you need to unclip the fixing rivets located at the bottom of the rear bumper and inside the wheel arches…
Honda Civic (1995-2001 / MK 6) To replace the rear light bulb, you need to remove the inner side trim of the boot: this allows access to the lamp holder and inspection of the bulbs…
Honda Civic (1995-2001 / MK 6) This guide provides the main instructions for removing and replacing the front bumper of the sixth series Honda Civic. First, open the bonnet and sta…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos