Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace, Repair or Modify Rear Drum Brakes

Model: Honda Civic MK 7 - Years: 2001, 2002, 2003, 2004, 2005, 2006
Part: Brake drums and shoes

See other generations:
Video tutorial

This video shows how to replace the rear drum brakes of the Honda Civic. After lifting the vehicle on a ramp, unscrew the securing bolts and remove the rear wheel.

Slide off the drum. Using pliers, unclip the return springs; by pressing on one end, also disconnect the actuator cylinder, then, with the pliers, detach the retaining clips and remove the shoes.

Apply some anti-seize paste at the contact points, then reposition one shoe; temporarily place one spring and also fit the second shoe, then, pulling them with the pliers, attach both return springs. Finally, refit the drum and reassemble the wheel.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Shoes on a Honda Civic
How to Replace the Rear Brake Shoes on a Honda Civic
Honda Civic (1995-2001 / MK 6) This video shows the main steps to remove and replace the rear brake shoes on a Honda Civic. First, lift the vehicle and remove the rear wheel; then,…
Replacement of Rear Wishbone Bushes
Replacement of Rear Wishbone Bushes
Honda Civic (2006-2012 / MK 8) To replace the bush (or silent block) of the rear suspension wishbone, it is necessary to remove the wishbone from the vehicle. Lift the vehicle on a…
Replacement of Brake Shoes with Cleaning of Drums and Rear Brake Shoes
Replacement of Brake Shoes with Cleaning of Drums and Rear Brake Shoes
Honda Civic (2001-2006 / MK 7) For this operation, you will need the following tools: a 12mm spanner, a set of screwdrivers, brake cleaner, and rags. First step: lift the vehicle a…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos