Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Spark Plugs on Honda CR-V

Model: Honda CR-V MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017
Part: Spark plugs

See other generations:
Video tutorial

Is the car having ignition problems? Let's look at replacing the spark plugs on the Honda CR-V. Open the bonnet and lift it, securing it in place. Remove the soundproofing panel covering the engine, disconnect the power terminals, and remove the coil bar on the cylinder head using a screwdriver.

Next, use a socket wrench to unscrew the spark plugs and pull them out of the cylinder head. Take the new spark plugs and guide them into the cylinder head using the extension of the socket wrench, tighten them, and connect the power coils to each spark plug.

Refit the coil bar and reconnect the electrical terminals. Refit the panel.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on a Honda CR-V
How to Replace the Spark Plugs on a Honda CR-V
Honda CR-V (2007-2012 / MK 3) To replace the spark plugs on a Honda CR-V, open the bonnet to detach the cover on top of the engine block, under which the coils are located. Once t…
Removing Spark Plugs on Honda CR-V
Removing Spark Plugs on Honda CR-V
Honda CR-V (2002-2007 / MK 2) How to remove the ignition spark plugs on a Honda CR-V? Open the engine bay and remove the engine cover panel. Take off the cover above the cylinder …
How to Replace Spark Plugs on a 2017 Honda CR-V
Honda CR-V (2017-2022 / MK 5) Learn how to change the spark plugs on the 1.5 engine of a 2017 Honda CR-V: Start by opening the front bonnet and remove the cover by unscrewing the …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos