Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Spark Plugs on a 2017 Honda CR-V

Model: Honda CR-V MK 5 - Years: 2017, 2018, 2019, 2020, 2021, 2022
Part: Spark plugs

See other generations:
This video is currently unavailable

Learn how to change the spark plugs on the 1.5 engine of a 2017 Honda CR-V: Start by opening the front bonnet and remove the cover by unscrewing the two Torx screws with a 10mm Allen key. Next, remove the ignition coils: four screws, also 10mm, and then disconnect the connectors by pressing the tab inward.

Carefully extract them: the YouTuber correctly keeps them in order (1-2-3-4) from the transmission side.

Using a 14mm socket with a rubber seal, remove the spark plugs from their housing. Alternatively, a telescopic magnet will also work.

The new spark plug should be hand-tightened until fully seated, then tightened by 1/4 or 1/8 of a turn: excessive torque can damage the cylinder head. NGK laser iridium plugs are recommended, available on auto-doc.it with EAN code 87295957103 at a price of £83.96 for four plugs and £9.90 for shipping.

Refit the plugs and coils in reverse order.


Posted on 13 February 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on a Honda CR-V
How to Replace the Spark Plugs on a Honda CR-V
Honda CR-V (2007-2012 / MK 3) To replace the spark plugs on a Honda CR-V, open the bonnet to detach the cover on top of the engine block, under which the coils are located. Once t…
Removing Spark Plugs on Honda CR-V
Removing Spark Plugs on Honda CR-V
Honda CR-V (2002-2007 / MK 2) How to remove the ignition spark plugs on a Honda CR-V? Open the engine bay and remove the engine cover panel. Take off the cover above the cylinder …
Replacing Spark Plugs on Honda CR-V
Replacing Spark Plugs on Honda CR-V
Honda CR-V (2012-2017 / MK 4) Is the car having ignition problems? Let's look at replacing the spark plugs on the Honda CR-V. Open the bonnet and lift it, securing it in place. Re…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos