Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Ignition Coil

Model: Honda CR-V MK 3 - Years 2007-2012
Part: Ignition coil

Open and lift the bonnet, unscrew the bolts, and remove the upper engine cover. You will only need to remove the top one to observe the position of the coils. Unscrew the bolts that secure them, and you can easily pull them upwards, possibly rotating them as you lift. Now disconnect the connectors and replace the coil, inserting it into its housing and reconnecting the connector. Bolt the coil in place and repeat the process for all four coils. Once all tasks are completed, you can follow the steps in reverse.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Honda CR V
How to replace the rear headlight bulb of the Honda CR V
Honda CR-V (2012-2017 / MK 4) Today we will explain how to replace the front headlight bulb on a Honda CR V vehicle. Performing the replacement is a simple and quick operation to …
How to replace the fog light bulb on the 2015 Honda CR-V
How to replace the fog light bulb on the 2015 Honda CR-V
Honda CR-V (2012-2017 / MK 4) Today, I will explain how to replace the fog light bulb on the 2015 Honda CR-V. To replace the bulb, you must remove the plastic cover on the bodywor…
How to change the battery of the Honda CR V key
How to change the battery of the Honda CR V key
Honda CR-V (2002-2007 / MK 2) In this article we will illustrate the procedure for replacing the battery of the Honda CR V remote control. For this procedure, you will need a coin…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos