Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Ignition Coils on the Honda Civic

Model: Honda Civic MK 8 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Ignition coil

See other generations:
Video tutorial

To replace the ignition coils on the Honda Civic, open the bonnet and locate the components on the upper part of the engine block. There will be four coils to remove, and you can disconnect all the cables attached to them.

Once the cables are disconnected, unscrew the bolt that secures the coil in its housing. This will allow you to extract the coil and replace it with a new spare part.

After replacement, secure and reconnect the new coils.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How to Replace the Ignition Coils on a Honda Civic
How to Replace the Ignition Coils on a Honda Civic
Honda Civic (2001-2006 / MK 7) To replace the ignition coils on a Honda Civic, start by opening the bonnet. Use a small flathead screwdriver to release the screws on the coil cover…
How to replace the spark plugs in a Honda Civic 8
How to replace the spark plugs in a Honda Civic 8
Honda Civic (2006-2012 / MK 8) In this video tutorial, you can see how to replace the spark plugs in a Honda Civic 8: get in the vehicle, turn off the engine, and pull the handbrak…
Replacing the Spark Plug on Honda Civic
Replacing the Spark Plug on Honda Civic
Honda Civic (2006-2012 / MK 8) Replacing a damaged spark plug on a Civic? Here’s how to remove it from the engine head. Lift the front bonnet, secure it, and disconnect the battery…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos