Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Replacing the Injection Coil

Model: Honda Civic MK 6 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Ignition coil

See other generations:
Video tutorial

Before starting, ensure that the engine bonnet is open and secured for safety. You can now unclip the plastic cover over the spark plugs (each spark plug lead has an ignition coil).

Disconnect the plug connected to the coil of the lead, unscrew the securing screws of the coil, and remove it along with the lead. Insert the new coil and secure it by tightening the relevant locking screws (repeat this operation for each damaged coil), reconnect the plug, and reposition the plastic cover.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

Spark Plug Replacement Instructions
Spark Plug Replacement Instructions
Honda Civic (2006-2012 / MK 8) It is recommended to perform this repair with the engine cold. Open the bonnet and ensure it is securely supported: near the oil level dipstick, you …
How to Replace the Ignition Coils on the Honda Civic
How to Replace the Ignition Coils on the Honda Civic
Honda Civic (2006-2012 / MK 8) To replace the ignition coils on the Honda Civic, open the bonnet and locate the components on the upper part of the engine block. There will be four…
How to Replace the Ignition Coils on a Honda Civic
How to Replace the Ignition Coils on a Honda Civic
Honda Civic (2001-2006 / MK 7) To replace the ignition coils on a Honda Civic, start by opening the bonnet. Use a small flathead screwdriver to release the screws on the coil cover…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos