Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Spark Plug Replacement Instructions

Model: Honda Civic MK 8 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Spark plugs

See other generations:
Video tutorial

It is recommended to perform this repair with the engine cold. Open the bonnet and ensure it is securely supported: near the oil level dipstick, you can see the ignition coils with the corresponding spark plug leads.

Unscrew the coil fixing screw, disconnect the connector, and remove it along with the lead. At this point, unscrew the old spark plug and replace it with the new one without over-tightening.

Reattach the lead to the coil, tighten the coil fixing screw, and reconnect the connector. Proceed in the same manner for the other spark plugs.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

Replace the Spark Plugs on Honda Civic
Replace the Spark Plugs on Honda Civic
Honda Civic (2006-2012 / MK 8) Replacing the spark plugs? Let's see how to remove the plugs on the Civic. Pull the lever to open the engine compartment located at the bottom left o…
Instructions for Replacing the Injection Coil
Instructions for Replacing the Injection Coil
Honda Civic (1995-2001 / MK 6) Before starting, ensure that the engine bonnet is open and secured for safety. You can now unclip the plastic cover over the spark plugs (each spark …
Spark Plug Lead Replacement
Spark Plug Lead Replacement
Honda Civic (1995-2001 / MK 6) This tutorial shows the easy procedure to replace the spark plug leads on a Honda Civic. After purchasing the appropriate leads, simply pull the old …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos