Do it yourself
Frequently asked questions about cars and motorcycles

Spark Plug Lead Replacement

Model: Honda Civic MK 6 - Years 1995-2001
Part: Spark plugs

This tutorial shows the easy procedure to replace the spark plug leads on a Honda Civic. After purchasing the appropriate leads, simply pull the old leads outwards with your hands. Once this is done, take the new lead and apply a small amount of dielectric silicone to the end of the boot using the tip of a screwdriver. Install the new lead in the same position as the old one. Connect the new lead to the brackets that hold it in place. Repeat the same process for all four leads.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Honda Civic (2006-2012 / MK 8) Replacing a damaged spark plug on a Civic? Here’s how to remove it from the engine head. Lift the front bonnet, secure it, and disconnect the battery…
Honda Civic (2006-2012 / MK 8) Replacing the spark plugs? Let's see how to remove the plugs on the Civic. Pull the lever to open the engine compartment located at the bottom left o…
Honda Civic (2001-2006 / MK 7) Gently remove the plastic cover protecting the engine by undoing the four securing screws. To avoid mixing up the leads, disconnect only the first sp…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos