Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Application of Wood Effect Interior Finishes

Model: Honda CR-V MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Dashboard

See other generations:
Video tutorial

You can apply adhesive plates to enhance the aesthetics of the dashboard and the internal trims of the door panels with a wood effect or aluminium finish (the video shows the wood effect). Without removing any components, thoroughly clean all areas where you will apply the decorative plates using a silicone remover to ensure the adhesive bonds properly and lasts over time.

Once cleaned, remove the protective film from the adhesive and apply the plates, ensuring they adhere correctly.


Updated on 4 February 2026 by ScegliAuto


Related tutorials

How to Make the Honda CR-V Suitable for Camping
How to Make the Honda CR-V Suitable for Camping
Honda CR-V (2017-2022 / MK 5) As shown in the video, in the Honda CR-V, the rear seats are fully lowered, and a wooden structure approximately one metre wide and almost two metres…
Fitting Door Trims
Fitting Door Trims
Honda CR-V (2007-2012 / MK 3) To fit the trims on the doors, carefully clean the surface of the doors where the trims will be glued, removing any dirt residue. Then position the s…
Application of Tinted Films
Application of Tinted Films
Honda CR-V (2007-2012 / MK 3) For the application of tinted films on the windows, specific equipment is required: glass cleaner and a sponge with a mesh for cleaning, application …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos