Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of Central Tunnel Armrest

Model: Honda Civic MK 8 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Accessory kit

See other generations:
Video tutorial

To install the armrest along the central tunnel, first remove the existing one along the side of the seat: remove the cap, loosen the armrest's fixing pin, and dismantle the two screws and bracket; then apply the plastic cover and the corresponding cap. Next, proceed to remove the central tunnel covering by taking out the clips and some screws; dismantle the support bracket for the cables located just behind the handbrake and replace it with the one included in the armrest installation kit. Drill holes in the back of the central tunnel's plastic covering to allow the fixing pins of the new armrest and its bracket to pass through.

Reinstall the tunnel covering complete with armrest.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Installation of Central Tunnel Armrest
Installation of Central Tunnel Armrest
Honda Civic (2001-2006 / MK 7) Installing the armrest on the central tunnel involves replacing the entire covering: you will need to relocate the cigarette lighter and aux outlet o…
Removing the Armrest on a Honda Civic Seat
Removing the Armrest on a Honda Civic Seat
Honda Civic (2006-2012 / MK 8) Want to remove the armrest from the Civic? Here's how to do it. Remove the trim plastics from the back of the centre tunnel, position the armrest hor…
Installation of Shaped Rubber Floor Mats
Installation of Shaped Rubber Floor Mats
Honda Civic (2006-2012 / MK 8) Installing shaped rubber floor mats for the specific car model with raised edges is extremely simple; just place them over the original carpet mats a…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos