Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. Civic
    4. : Central tunnel armrest installation

Honda Civic - Video tutorial

Model: Honda Civic MK 7 - Years 2001-2006
Part: Accessory Kit
Operation: Central tunnel armrest installation

The installation of the armrest on the central tunnel involves the replacement of the entire upholstery: it will be necessary to move the cigarette lighter and the aux output to the new upholstery. Disassembly is very simple since the cover is fixed with two screws and two pressure locks (before extracting the latter, the central pin must be pressed in to release them); the plastic tab under the handbrake must then be removed. Once the cover has been removed, take out the cigarette lighter plug and unscrew the fixing screws of the aux socket to be able to apply them to the new cover. Install in reverse order.


Posted on 16 July 2023 by ScegliAuto



Central tunnel armrest installation
Honda Civic (2006-2012 / MK 8) To install the armrest along the central tunnel, first remove the one along the side of the seat: remove the cap, loosen the armrest fixing pin and r
Removing the armrest on the Honda Civic seat
Honda Civic (2006-2012 / MK 8) Do we want to remove the armrest of the Civic? Let's see how it disassembles. We remove the plastic coverings in the rear part of the central tunnel,
Installation of shaped rubber mats
Honda Civic (2006-2012 / MK 8) The installation of the rubber mats shaped for the specific car model and with the raised edge, are extremely simple to install, i.e. they must only

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos