Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Illuminated Manufacturer Emblem

Model: Honda Civic MK 7 - Years: 2001, 2002, 2003, 2004, 2005, 2006
Part: Manufacturer emblem

See other generations:
Video tutorial

If you wish to replace the manufacturer's emblem, proceed as follows. Using a plastic tool to avoid damaging the bodywork, place a cloth near the logo to be removed and leverage between the logo and the bodywork, prising it out at multiple points until it comes free from its seat.

Using a pair of tweezers, gently remove the two plastic clips and install two new ones. Drill a hole in the correct position to pass the LED power wire through.

Clean the surface well, feed the wire through the hole, and apply the logo. Connect the LED wires directly to the ignition circuit of the number plate lights.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Honda Civic
How to Reset the Service Light on the Honda Civic
Honda Civic (2012-2015 / MK 9) If you have changed the engine oil and filter on this model, you need to reset the service light that has illuminated on the dashboard. The procedure…
How to Reset the Tyre Warning Light on the 2020 Honda Civic
How to Reset the Tyre Warning Light on the 2020 Honda Civic
Honda Civic (2016-2021 / MK 10) In this guide for all 2020 Honda Civic owners, discover the steps to manually reset the tyre warning light that stays illuminated on the instrument c…
How to Reset the Airbag Light on Honda Civic
How to Reset the Airbag Light on Honda Civic
Honda Civic (2006-2012 / MK 8) In this video tutorial, you will see how to reset the airbag warning light that has illuminated on the Honda Civic. First, get inside the vehicle and…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos