Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Repairing Severe Body Damage

Model: Honda Civic MK 6 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Body

See other generations:
Video tutorial

Small scratches on the bodywork are relatively easy to repair, but in the case of heavy dents, it is necessary to replace the entire damaged part. Once the damaged parts are removed, new structures must be welded in their place.

Next, begin gently sanding the damaged area with a grinder to make the surface smooth and clean from oils and grease, also using a solvent. Protect the area not involved in the touch-up with tape.

Using two-component body filler or spray, evenly spread the compound over the previously treated area. If necessary, dry with an infrared lamp.

Once the filler has set, sand carefully to make the surface smooth and even; if needed, add more filler, especially in the depressions. Repeat the sanding process.

Protect the areas not involved in painting with paper and tape, then using acrylic paint and primer in a 2:1 ratio, repaint the treated area.


Updated on 6 February 2026 by ScegliAuto


Related tutorials

Correct Use of the Jack When Changing Tyres
Correct Use of the Jack When Changing Tyres
Honda Civic (2001-2006 / MK 7) Correct use of the jack when changing tyres is essential to avoid damage to the vehicle or injury to individuals. Consult the vehicle's manual to cor…
Removing the Car Radio for Repair
Removing the Car Radio for Repair
Honda Civic (2001-2006 / MK 7) To begin disassembly, remove the gear knob. Using a plastic tool to avoid damaging the bodywork, carefully remove the plastic trim around the gear le…
How to Repair the External Mirror of the Honda Civic 8
How to Repair the External Mirror of the Honda Civic 8
Honda Civic (2006-2012 / MK 8) This video shows how to repair the external rear-view mirror of the Honda Civic 8. This tutorial is useful if the mirror's closure starts to malfunct…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos