Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Internal Handle on Honda Accord

Model: Honda Accord MK 7 - Years 2002-2007
Part: Door lock

Remove the small round screw cover near the opening handle using a small flathead screwdriver, then unscrew the underlying screw. Pull the handle, move it slightly to the right, and extract it from its housing. Disconnect the lock cable and the connector. With the handle casing in hand, you can unscrew it from the back, removing the switch if it's broken and fitting a new one, or completely replacing the handle. Reconnect the lock cable and the connector, then reassemble everything. This operation takes some time but is within everyone's reach.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Honda Accord (1998-2002 / MK 6) To replace the external wing mirror on the Honda Accord, first remove the internal door panel. To do this, unscrew the bolts securing it: these are l…
Honda Accord (2002-2007 / MK 7) To replace the window regulator on a Honda Accord, unscrew the screws securing the corresponding door panel; these are located at the handle recess a…
Honda Accord (2002-2007 / MK 7) Before you start, open the bonnet of your Honda Accord. Begin by disconnecting the hoses connected to the radiator fan, then unplug the electrical co…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos