Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wishbone on a Honda Civic

Model: Honda Civic MK 6 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001
Part: Control arm

See other generations:
Video tutorial

Before you can start, lift the front end of your Honda Civic. Begin by removing the front wheel by unscrewing the fixing bolts.

Next, unscrew and remove the bolts that secure the wishbone to the suspension assembly. By doing this, you will have freed the wishbone itself.

At this point, unclip and remove the wishbone, completing the disassembly. To fit the new wishbone, follow this procedure in reverse, and you will have finished the replacement.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

How to Replace the Wishbone on a Honda Civic
How to Replace the Wishbone on a Honda Civic
Honda Civic (2001-2006 / MK 7) If you need to replace the suspension wishbone, lift the vehicle on a ramp and remove the front wheel for better access. Then disconnect the stabilis…
Front Suspension Wishbone Ball Joint Replacement
Front Suspension Wishbone Ball Joint Replacement
Honda Civic (1992-1995 / MK 5) The ball joint of the front suspension wishbone is pressed into the front hub; therefore, to replace it, you need to free the hub to apply a puller. …
Where is the fuse box of the Honda Civic?
Where is the fuse box of the Honda Civic?
Honda Civic (2012-2015 / MK 9) Locating the fuses inside your Honda Civic (2012-2015) is straightforward and with the following guide, you will find them without any difficulty. Fi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos