Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Brake Discs and Front Pads

Model: Honda CR-V MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Brake rotors

See other generations:
Video tutorial

Lift the vehicle on suitable car stands and remove the front wheel; then detach the fixing pins of the brake calliper and its support; unscrew the fixing pins of the disc (use an impact screwdriver if necessary) and remove it from the hub: give a few taps with a hammer on the disc (as it will be replaced) rather than leverage on the hub's rib which may give way). Apply the new disc after cleaning it of protective oil, tighten the respective fixing pins, apply the new pads, and reassemble the support and calliper.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Honda CR-V
How to Replace the Front Brake Pads on a Honda CR-V
Honda CR-V (2007-2012 / MK 3) To replace the front brake pads on a Honda CR-V, lift the vehicle so that you can unscrew the bolts securing the wheel corresponding to the pads to b…
How to replace the front brake pads on the Honda CR-V?
How to replace the front brake pads on the Honda CR-V?
Honda CR-V (2012-2017 / MK 4) To replace the front brake pads on the Honda CR-V, lift the car so that the front wheels are off the ground. Once the car is lifted, loosen the bolts…
Replacement of Front Brake Discs and Pads
Replacement of Front Brake Discs and Pads
Honda CR-V (2002-2007 / MK 2) The necessary tools for the operation are: torque wrench, ratchet spanner, Allen key, hammer, and wire brush. Remove the retaining springs from the d…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos