Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Automatic Gearbox Oil Replacement.

Model: Honda Accord MK 5 - Years: 1993, 1994, 1995, 1996, 1997, 1998
Part: Transmission fluid

See other generations:
Video tutorial

To drain the oil from the gearbox, position a suitable container beneath the gearbox and unscrew the plug located near the front suspension's wishbone. While draining the oil, carefully clean the drain plug, which has a magnetic end designed to collect metallic debris.

Once the oil has fully drained, refit the plug. Next, access the engine bay and locate the oil level dipstick for the gearbox, near the battery.

Insert a funnel and fill the gearbox with new oil. To perform a sort of purge, connect a rubber hose to the oil outlet pipe and start the engine: allow the oil to flow out until the colour becomes clear like new oil. Restore the level by topping up.


Updated on 8 February 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Shift Knob on Honda Accord Automatic
How to Replace the Gear Shift Knob on Honda Accord Automatic
Honda Accord (2012-2017 / MK 9) Today we will see the step-by-step instructions that will allow us to disassemble and replace the gear shift knob on the Honda Accord automatic. Firs…
How to reset the engine oil change indicator light on the Honda Accord Mk8
How to reset the engine oil change indicator light on the Honda Accord Mk8
Honda Accord (2008-2013 / MK 8) The guide shows how to reset the engine oil change indicator light on the Honda Accord Mk8. As a first step, it is necessary to perform the correct p…
Engine Oil Change on a Honda Accord MK7
Engine Oil Change on a Honda Accord MK7
Honda Accord (2002-2007 / MK 7) In this short tutorial video, we will see how to change the oil and the corresponding filter on a Honda Accord MK7, produced from 2002 to 2007. First…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos