Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the engine oil change indicator light on the Honda Accord Mk8

Model: Honda Accord MK 8 - Years 2008-2013
Part: Service warning light

The guide shows how to reset the engine oil change indicator light on the Honda Accord Mk8. As a first step, it is necessary to perform the correct procedure for replacing the lubricant before resetting the indicator light. With the instrument panel on, press the reset button for the partial odometer until the oil change message appears. Hold the button for about ten seconds until the engine oil life percentage flashes, then press it again for another five seconds. Turn off and on the instrument panel and repeat the procedure. At the end of the second cycle, turn off and on the engine to check the correct reset of the indicator light.

Posted on 30 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Light on the Honda Accord
Resetting the Service Light on the Honda Accord
Honda Accord (2002-2007 / MK 7) The instructions in this guide will show you how to reset the service light for the routine maintenance oil change on the Honda Accord. First, get in…
How to reset the oil light on the 2010 Honda Accord
How to reset the oil light on the 2010 Honda Accord
Honda Accord (2008-2013 / MK 8) If you own a 2010 Honda Accord and are wondering what steps you need to take to complete the manual reset of the engine oil light, then just read the…
How to Reset the Maintenance Light on a Honda Accord Mk8
How to Reset the Maintenance Light on a Honda Accord Mk8
Honda Accord (2008-2013 / MK 8) This guide shows how to reset the maintenance light on a Honda Accord Mk8. To perform the reset, use the controls on the steering wheel. Press the "S…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos