Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Change on a Honda Accord MK7

Model: Honda Accord MK 7 - Years: 2002, 2003, 2004, 2005, 2006, 2007
Part: Engine oil

See other generations:
Video tutorial

In this short tutorial video, we will see how to change the oil and the corresponding filter on a Honda Accord MK7, produced from 2002 to 2007. First, go underneath the vehicle and place a drain pan under the oil sump. Unscrew the sump bolt and allow all the used oil to drain out, then re-tighten the plug.

Now, remove the old oil filter located above the sump and fit the new filter after lubricating the rubber O-ring. Next, move to the engine bay to add the new oil, and you will have completed the job.


Updated on 10 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil of the Honda Accord
How to Change the Engine Oil of the Honda Accord
Honda Accord (2002-2007 / MK 7) To change the engine oil of the Honda Accord, loosen the drain plug located at the bottom of the car. Unscrewing this plug will allow the used oil to…
Resetting the Service Light on the Honda Accord
Resetting the Service Light on the Honda Accord
Honda Accord (2002-2007 / MK 7) The instructions in this guide will show you how to reset the service light for the routine maintenance oil change on the Honda Accord. First, get in…
How to reset the oil light on the 2006 Honda Accord
How to reset the oil light on the 2006 Honda Accord
Honda Accord (2002-2007 / MK 7) To manually reset the engine oil light on the instrument panel display of your 2006 Honda Accord, simply follow the guide below and apply all the ste…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos