Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Rear Light

Model: Honda CR-V MK 2 - Years 2002-2007
Part: Tail light

To remove the rear light, first open the rear hatch and locate the protective caps over the fixing screws of the light, positioned along the inner edge. Once the caps are removed, unscrew the fixing screws and pull the light forward to extract it from its housing. At this point, you can proceed with replacing the bulbs (bayonet fitting).
Then reverse the process for reassembly, carefully seating the light in its housing and tightening the relevant fixing screws, finally reapplying the protective caps.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlamp Bulb on a Honda CR-V
How to Replace the Rear Headlamp Bulb on a Honda CR-V
Honda CR-V (2007-2012 / MK 3) To replace the rear headlamp bulb on a Honda CR-V, open the boot to access the screws securing the headlamp next to the seal. Loosen these screws to …
Removal of the rear bumper of a Honda CR-V
Removal of the rear bumper of a Honda CR-V
Honda CR-V (2007-2012 / MK 3) In this very useful video tutorial today, we will see the entire procedure necessary to remove the rear bumper of a third-generation Honda CR-V. Firs…
How to Replace the Front Fog Light Bulbs on a Honda CR-V
How to Replace the Front Fog Light Bulbs on a Honda CR-V
Honda CR-V (2012-2017 / MK 4) This guide provides instructions on how to remove and replace the front fog light bulbs on a Honda CR-V, following these simple steps. First, remove …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos