Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Reverse Light Bulb of the Honda Jazz?

Model: Honda Jazz MK 1 - Years 2001-2008
Part: Light bulb

To replace the reverse light bulb of the Honda Jazz, open the tailgate of the boot and remove the cover located on the side of the boot, corresponding to the light containing the bulb to be replaced. This should be extracted from its housing and disconnected from its connector so that it can be replaced. The new bulb can then be connected to the connector and inserted back into its designated housing. Once inserted, you can reattach the cover of the boot wall that was removed earlier.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to activate and deactivate the high beams of the Honda Jazz 4
How to activate and deactivate the high beams of the Honda Jazz 4
Honda Jazz (2019-2026 / MK 4) In this new guide dedicated to all of you who own a fourth series Honda Jazz, we will explain how you can correctly activate and deactivate the high …
How to replace the front headlight bulb of the Honda Jazz
How to replace the front headlight bulb of the Honda Jazz
Honda Jazz (2001-2008 / MK 1) These brief steps will show us how to disassemble and replace the low beam headlight bulb of the Honda Jazz. First, it will be necessary to access it…
Replacing Front Position Bulb on Honda Jazz
Replacing Front Position Bulb on Honda Jazz
Honda Jazz (2008-2013 / MK 2) In this video tutorial, you will find instructions on how to remove and replace the front position bulb on a Honda Jazz. First, open and lift the bon…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos