|
Do it yourself
| |||
| ||||
How to Remove the Car Radio in a Few Steps
Model: Honda Civic
MK 8
- Years 2006-2012
First, note that in this car, the entire dashboard and front section are connected. As a first step, slide the seat forward, and using a screwdriver and a metal tool to detach the various plastic trims, remove the screws found in the central area of the compartment. Then, slide the seat forward again and remove the other screw, followed by the one at the front. Now move to the passenger side; on the right, use the metal tool to remove the plastic cover by applying pressure, and using the screwdriver, take out the screws to detach the entire lower plastic section. Repeat the same operation on the driver's side. Now, using both hands, slightly below the gear lever, detach the section where the handbrake is located, and then that of the gear lever, again using the metal tool. Now move on to the car radio. Lift the upper part, where the air vents are located, and gently remove the top of the radio. Remove the screws that are now exposed, both above and below, and you can now detach the car radio. Disconnect the electrical wires and you're done.
Updated on 10 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Honda Civic
(2006-2012 /
MK 8)
In this tutorial, learn how to remove and replace the standard stereo of the Honda Civic by following these simple and quick steps. First, get inside…
Honda Civic
(2001-2006 /
MK 7)
To begin disassembly, remove the gear knob. Using a plastic tool to avoid damaging the bodywork, carefully remove the plastic trim around the gear le…
Honda Civic
(2012-2015 /
MK 9)
In this short and simple guide, you will learn how to remove and replace the factory stereo of the 2014 Honda Civic 9 in a few easy steps. First, get…
Other guides you may be interested in
|
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.123
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |