Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Brake Pads

Model: Honda Civic MK 8 - Years 2006-2012
Part: Brake pads

Lift the vehicle on suitable axle stands and remove the front wheel (loosen the wheel nuts before lifting it). Then unscrew the retaining pins of the brake caliper (it is sufficient to unscrew the lower pin and use the upper one as a hinge to lift the caliper); remove the old pads and sliding shims; clean the disc thoroughly, insert the new shims (always included in the new pads kit) applying copper grease; finally, insert the new pads, retract the caliper piston using a C-clamp (there is no need to open the bleed screw) and refit it.

Updated on 10 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacement of Front Brake Discs and Pads
Replacement of Front Brake Discs and Pads
Honda Civic (2001-2006 / MK 7) Loosen the wheel fixing bolts before lifting the vehicle, then raise it with a jack (or on a lift) and complete the wheel removal. Unscrew the two fi…
How to Replace the Rear Brake Pads on a Honda Civic
How to Replace the Rear Brake Pads on a Honda Civic
Honda Civic (2006-2012 / MK 8) To replace the rear brake pads on a Honda Civic, lift the car so that the rear wheel is off the ground. Next, undo the bolts securing the wheel in it…
How to Replace the Front Brakes on a Honda Civic Mk8
How to Replace the Front Brakes on a Honda Civic Mk8
Honda Civic (2006-2012 / MK 8) This guide shows how to replace the front brakes on a Honda Civic Mk8. Using a 19 mm spanner, loosen the bolts on the front wheels and lift the vehic…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos