Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Honda
    3. :
  3. CR-V
    4. : Remove and replace front suspension

Honda CR-V - Video tutorial

Model: Honda CR-V MK 2 - Years 2002-2007
Part: Suspensions
Operation: Remove and replace front suspension

This video shows us how to remove and replace the front suspension of our car. First we begin to remove the nuts that secure the suspension, one placed at the top and two more at the bottom behind the brake disc. Following the removal of the nuts in order to extract our suspension we will also need to remove the three nuts placed in the bonnet that anchor it to the bodywork. Once these operations have been carried out, we can extract the suspension and install the new one in a simple way, positioning it in the right way and always carrying out the aforementioned operations backwards.


Posted on 30 July 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos