Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Bulbs on the Honda CR-V

Model: Honda CR-V MK 3 - Years 2007-2012
Part: License plate light

Follow these main instructions on how to remove and replace the number plate bulbs on the Honda CR-V by following these simple steps. First, move to the rear of the vehicle and start by detaching the interior light cover, prising it off from the sides; then remove the cover from the bulb holder, as shown in the video. At this point, remove the small bulb and replace it with the new one (with the same fitting); insert it the correct way and refit the cover, replacing the other number plate light in the same manner!

Updated on 23 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter of the Honda CR-V 2021
How to Replace the Cabin Filter of the Honda CR-V 2021
Honda CR-V (2017-2022 / MK 5) If you own a Honda CR-V Mk5 (2021) and want to learn how to replace the cabin air filter, simply read this guide carefully and follow the steps descr…
How to Replace the Air Filter on a Honda CR-V?
How to Replace the Air Filter on a Honda CR-V?
Honda CR-V (2012-2017 / MK 4) To replace the air filter on a Honda CR-V, open the bonnet to access the components inside the engine bay: immediately to the right of the engine blo…
How to Replace the Remote Battery on a Honda CR-V?
How to Replace the Remote Battery on a Honda CR-V?
Honda CR-V (2012-2017 / MK 4) To replace the remote battery on a Honda CR-V, loosen the small screw located at the top rear of the device, just below the key. Once this screw is r…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos