Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the CD Changer

Model: Honda CR-V MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Accessory kit

See other generations:
Video tutorial

The typical fault of the CD changer is the failure to eject discs and reading errors: a skilled technician will know how to repair it. The CD changer is located under the armrest, and to remove it, you must disassemble the armrest. Start by detaching the front cover of the armrest structure, disconnect the connector, and unscrew the fixing screws to the metal subframe; then open the compartment with the roller shutter, remove the mat at the bottom, and unscrew the underlying screws.

At this point, you can remove the armrest and access the CD changer: then disconnect the connector and unscrew the fixing screws of the changer to the metal subframe to remove it.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

How to Change the Radio in a Honda CR-V
How to Change the Radio in a Honda CR-V
Honda CR-V (2012-2017 / MK 4) To start changing the radio, begin by removing the air vents on either side of the radio using a plastic wedge to pry at the sides of the vents; once…
How to Enter the Unlock Code for the Honda CR-V Radio
How to Enter the Unlock Code for the Honda CR-V Radio
Honda CR-V (2007-2012 / MK 3) In this video tutorial, you will learn how to enter the unlock code for the third-generation Honda CR-V radio, following the instructions below. Firs…
How to Retrieve the Radio Code for the Honda CR-V
How to Retrieve the Radio Code for the Honda CR-V
Honda CR-V (2007-2012 / MK 3) Turn the key to switch on the instrument panel, thus powering the vehicle. Now press and hold buttons 1 and 6 on the radio while simultaneously press…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos