Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Pads on the Honda SH

Model: Honda Honda Various
Part: Brake pads

Video tutorial

If you need to replace the brake pads on this scooter model and are unsure how to proceed, you can find the necessary information and steps in the tutorial video and the description below. First, loosen the fixing screws of the caliper located behind the rubber covers that need to be removed beforehand.

Then, unscrew the caliper mounting nuts on the fork, and remove the caliper assembly. At this point, you can extract the pads and replace them with new ones.

After completing this step, reattach the caliper mounting bolts and tighten them, and you're done.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

How to replace the rear brake pads on the Honda SH 125/150 scooter
How to replace the rear brake pads on the Honda SH 125/150 scooter
Honda Honda Various In this video tutorial, you can see how to replace the rear brake pads on the Honda SH 125/150 scooter. Start by removing the cover that protects the…
Replacing the Brake Pads on a Honda DIO ZX 2001 AF34 Scooter
Replacing the Brake Pads on a Honda DIO ZX 2001 AF34 Scooter
Honda Honda Various In this tutorial video, see how to replace the brake pads on a Honda DIO ZX 2001 AF34 scooter: first, remove the brake caliper, which is usually held…
How to Access the Spare Wheel in the Honda Crosstour?
How to Access the Spare Wheel in the Honda Crosstour?
Honda Honda Various In this tutorial, see how to detach the lower basket and access the spare wheel in the Honda Crosstour, allowing you to replace it or use it in case …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos