Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear brake pads on the Honda SH 125/150 scooter

Model: Honda Honda Various
Part: Brake pads

In this video tutorial, you can see how to replace the rear brake pads on the Honda SH 125/150 scooter. Start by removing the cover that protects the battery; the screws for the battery cover can be found by opening the seat. Now, loosen the two bolts holding the exhaust using a 10 mm spanner. Before removing the exhaust, disconnect the sensor located under the plastic cover. Once the exhaust is removed, loosen the bolts to take off the caliper. Once the caliper is removed from its seat, you can take out the pads and replace them with new ones. Refit all parts in reverse order.

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Honda SH 125/150 Scooter
How to Replace the Air Filter on a Honda SH 125/150 Scooter
Honda Honda Various In this tutorial video, you can see how to replace the air filter on a Honda SH 125/150 scooter, Euro 5 model, produced from 2020 onwards, by followi…
How to Replace the Brake Pads on the Honda SH
How to Replace the Brake Pads on the Honda SH
Honda Honda Various If you need to replace the brake pads on this scooter model and are unsure how to proceed, you can find the necessary information and steps in the tu…
Replacing the Brake Pads on a Honda DIO ZX 2001 AF34 Scooter
Replacing the Brake Pads on a Honda DIO ZX 2001 AF34 Scooter
Honda Honda Various In this tutorial video, see how to replace the brake pads on a Honda DIO ZX 2001 AF34 scooter: first, remove the brake caliper, which is usually held…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos